performance
Power to weight
Compare mechanical horsepower per US short ton, kilowatts per metric tonne and pounds per horsepower from vehicle power and race-ready weight.
Open calculator
PERFORMANCE CALCULATOR0–60 MPH
0–60 MPH
Calculator
Calculate idealized time and distance to 60 MPH from an entered average acceleration. This kinematic worksheet does not infer acceleration from horsepower.
Your setup
g
Use an average measured or explicitly assumed acceleration. 1 g = 9.80665 m/s².Your results
CalculatedIdealized time to 60 MPH5.47s
Constant-acceleration distance240.69ft
Entered average acceleration4.90m/s²
Time follows the entered average acceleration. Distance additionally assumes the acceleration remains constant throughout the interval.
READ THE ASSUMPTIONS
Not a horsepower-based prediction. An average acceleration alone cannot reconstruct a real variable-acceleration distance profile. No rollout, slope or shift modeling.
THE FORMULA
How the calculation works
Follow the formula and keep the input units consistent at every step.
v = 60 × 0.44704 = 26.8224 m/s; a = entered g × 9.80665; time = v/a; distance = v²/(2a)- Enter average longitudinal acceleration over the 0–60 interval.
- Convert g to m/s² and 60 MPH to m/s.
- Calculate time and ideal constant-acceleration distance from rest.
A Worked Example
At a constant 0.5 g, acceleration is 4.903325 m/s². Time to 60 MPH is about 5.47 s and distance about 73.36 m (240.68 ft).
What Your Result Means
Time follows the entered average acceleration. Distance additionally assumes the acceleration remains constant throughout the interval.
Assumptions & Limitations
Not a horsepower-based prediction. An average acceleration alone cannot reconstruct a real variable-acceleration distance profile. No rollout, slope or shift modeling.
Common Mistakes
Do not enter peak acceleration as an interval average.
Questions about this calculation
Which values should I enter?
Enter average longitudinal acceleration over the 0–60 interval. Do not enter peak acceleration as an interval average.
How should I interpret the result’s precision?
Displayed results are rounded for readability. Intermediate calculations retain floating-point precision; extra displayed decimals do not improve your input accuracy.
Can I use metric units?
Yes. Select Metric above the calculator to convert your inputs. Results always state their units. Tire-size designations keep their conventional mm and inch units.
What are the main limitations?
Not a horsepower-based prediction. An average acceleration alone cannot reconstruct a real variable-acceleration distance profile. No rollout, slope or shift modeling.
Method, sources & relevant guides
Constant-acceleration kinematics. Our 0–60 tool uses an entered average acceleration; it does not predict acceleration from horsepower.
OpenStax — Representing acceleration with equations and graphsMethod documentation updated October 18, 2026. Independent professional review has not been claimed. Read the calculation and review policy.